ชุดหินนวดทําความร้อนดิจิตอล 6L 27ชิ้น 250V

*** ยินดีต้อนรับสู่การใช้ Daily Use ***

❤เปิดร้านใหม่ ส่วนลดเพียบ

❤รีบหยิบใส่ตะกร้า

❤ สินค้ามีในสต๊อก

❤จัดส่งฟรี

❤สนับสนุนการชำระเงินค่าค
Feature:
1. Accurate and digital temperature control displays required temperature and current temperature convneient to use.
2. Removable water reservoir for easy cleaning suitable for professional beauty salons and SPA center use.
3. Including 27pcs massage stones of the package good using effect to relieve fatigue relax nerves beauty and skin care healthy care.
4. Applicable for SPA clubs business hotels beauty salons beauty centers and so on to meet different demands.
5. Each massage stone is repeatedly polished to achieve smoothly and delicate edges excellence texture for safe use.

Specification:
Item Type: Massage Stone + Heater 
Material: Enamel coated steel + powder coated steel + Graystone
Plug: EU Plug 250V
 
Massage Stone Size: Approx. 
11 x 7 x 3cm / 4.3 x 2.8 x 1.2in XL Stone x 1pc 
7.5 x 5.5 x 2.75cm / 3 x 2.2 x 1.1in L Stone x 6pc 
6.5 x 4.5 x 1.75cm / 2.6 x 1.8 x 0.7in M Stone (Hand and arm) x 8pc 
3.75 x 3 x 1.75cm / 1.5 x 1.2 x 0.7in S Stone (Forehead neck and face) x 10pc 
8 x 3 x 1.75cm / 3.1 x 1.2 x 0.7in Deep Tissue Stone x 2pcs

Heating Pot Size: Approx. 44.5 x 31 x 23.5cm / 17.5 x 12.2 x 9.3in
Efficacy: Relieve fatigue relax nerves beauty and skin care healthy care
Applicable Scenarios: SPA clubs business hotels beauty salons beauty centers

How to use the heating pot:
Important explanation: In order to achieve a uniform temperature it is important to start with the water as close to your set temperature as possible. This prevents the temperature difference
1. All stones must be cleaned before use
2. Fill the water tank with hot water and let it stand for 2-3 minutes. Put the stones in a bowl and cover with hot water. Wait 3-4 minutes. These processes can prevent stone or water reservoirs from having a strong cooling effect on the water you added in step 4.
3. Pour out the water in the reservoir. Put a towel at the bottom of the reservoir. This is important to protect the enamel of the reservoir from shedding.
4. Put the stones on the towel in the reservoir. Add hot water. The temperature of most tap water is between 49°C and 60°C. Before you turn on the heater you need to check the water temperature with a thermometer. If the temperature of the water is higher than the temperature you require add a little cold water (stir it with the handle of the spoon to make it mix thoroughly) until it is the same temperature or slightly lower than the temperature you require. If the temperature is low add hot water. Turn on the heating. When the green light turns on you need to wait at least 10-15 minutes
Let the heat penetrate into the center of the stone (it will take 20 minutes if you use a larger stone). If you find that your stone is cooling too fast allow a longer time. Avoid using water temperature than the set temperature for equipment insulation which may take longer to cool to the set temperature (causing a delay when the green light will indicate that the heater can use) than needed if the water is taken from or slightly below the set temperature.
5. Plug the power cord into a grounded socket
6. Press the power button to turn on the heater.
7. Press the plus or minus button to select the desired temperature. EU plug-in heaters are in Celsius and the temperature will increase by 1 degree. Long press for 3 seconds the temperature will increase by 5°C or 10°C. If there is no set temperature after pressing the power button for 5 seconds the heater will automatically start to work heating to the lowest temperature of 40 ℃
8. When the heater is heating up the heating indicator light between the temperature indicators is red. When the required temperature is reached you will hear a sound and the LED will turn green. Even if the heating element will cycle on and off to maintain the desired temperature the heating indicator light will remain green.
9. When the required temperature is reached you need to leave the stone for a period of time to ensure that the heat has penetrated into the center of the stone. The larger the stone the longer it will take.
10. When moving a stone with a shovel touch the stone with your fingers and hold it in your hand to see if the temperature is warm.
11. When the hot stone phase is over press the power button to turn off the heater
12. Unplug the heater from the wall socket.
13. If you do not unplug the power source the water heater will automatically turn off after 6 hours.

Massage stone operation method
1. Preparation materials: Add pure water to the furnace drop the essential oil soak the hot stone in it plug in the power supply and heat it for about 20 minutes (the temperature can be determined according to the customers skin bearing capacity generally not more than 70 degrees Celsius).Heat up the energy stone and put it on the towel.